Ceiling is not uniformity
Reaching a displayed maximum does not prove that a loaded spool is heated evenly throughout the chamber.
← All dryers
Is this the right dryer for you?
Creality Space Pi
Original Space Pi: single-spool dryer with 360-degree PTC hot-air circulation, real-time humidity monitoring, a 45–70°C range, and a 0–48 hour timer. This record does not cover V2.
Choose this if: You print from one spool at a time and want adjustable 45–70°C drying with a timer.
Set the approved temperature and duration for that spool, then use the documented feed-through route during printing where the maker permits it. A single-spool unit keeps the choice focused on the capacity you use.
1 spoolfeed-through documented
Temperature-ceiling screen
Family references this model can reach on paper
The spool also has a limit
Do not expose a spool to more heat than its maker permits. Respooling may be required for higher-temperature drying.
Exact product data wins
Formulation-specific instructions override this family-level screen. Confirm the exact model and current regional product specification.