Ceiling is not uniformity
Reaching a displayed maximum does not prove that a loaded spool is heated evenly throughout the chamber.
← All dryers
Is this the right dryer for you?
SUNLU FilaDryer S2
Single-spool dryer with top-and-bottom heating, a circulation fan, preset material profiles, feed-through printing, and a documented 70°C maximum.
Choose this if: You want preset-led controls for one spool and the exact drying cycle stays within 70°C.
The display and material presets provide a starting point for routine one-spool drying, with a feed-through path for printing. Set the cycle to the purchased filament's instructions rather than trusting the preset name alone.
1 spoolfeed-through documented
Temperature-ceiling screen
Family references this model can reach on paper
The spool also has a limit
Do not expose a spool to more heat than its maker permits. Respooling may be required for higher-temperature drying.
Exact product data wins
Formulation-specific instructions override this family-level screen. Confirm the exact model and current regional product specification.