Material family reference
PLA-CF
A matte, stiff PLA composite that trades impact strength for finish.
Across the current printer database
Compatibility snapshot
The manufacturer explicitly places this family in its not-recommended group.
The manufacturer explicitly places this family in its not-recommended group.
The stock stainless steel nozzle is not verified as abrasive-ready.
The stock stainless steel nozzle is not verified as abrasive-ready.
Composite temperatures are a family-level screen, not an exact product profile. Confirm the filament's temperatures, minimum nozzle diameter and feeding-system restrictions before printing.
The stock brass nozzle is not verified as abrasive-ready.
The stock brass cht nozzle is not verified as abrasive-ready.
The stock brass cht nozzle is not verified as abrasive-ready.
The stock brass nozzle is not verified as abrasive-ready.
The stock brass nozzle is not verified as abrasive-ready.
The stock copper alloy nozzle is not verified as abrasive-ready.
Extruder-gear wear resistance is not recorded for this configuration. Confirm the maker's abrasive-filament hardware guidance; a wear-resistant nozzle alone does not verify the feed path.
Extruder-gear wear resistance is not recorded for this configuration. Confirm the maker's abrasive-filament hardware guidance; a wear-resistant nozzle alone does not verify the feed path.
Extruder-gear wear resistance is not recorded for this configuration. Confirm the maker's abrasive-filament hardware guidance; a wear-resistant nozzle alone does not verify the feed path.
The stock stainless steel nozzle is not verified as abrasive-ready.
The stock stainless steel nozzle is not verified as abrasive-ready.
The stock metal nozzle is not verified as abrasive-ready.
Extruder-gear wear resistance is not recorded for this configuration. Confirm the maker's abrasive-filament hardware guidance; a wear-resistant nozzle alone does not verify the feed path.
The stock quick-release metal nozzle is not verified as abrasive-ready.
The stock quick-release metal nozzle is not verified as abrasive-ready.
The stock quick-release metal nozzle is not verified as abrasive-ready.
The stock brass nozzle is not verified as abrasive-ready.
Extruder-gear wear resistance is not recorded for this configuration. Confirm the maker's abrasive-filament hardware guidance; a wear-resistant nozzle alone does not verify the feed path.
The stock standard metal nozzle is not verified as abrasive-ready.
Formulations, additives, fillers, pigments, and spool materials change requirements. Use the linked family source as orientation, then confirm the purchased product’s data sheet.